国产探花免费观看_亚洲丰满少妇自慰呻吟_97日韩有码在线_资源在线日韩欧美_一区二区精品毛片,辰东完美世界有声小说,欢乐颂第一季,yy玄幻小说排行榜完本

首頁 > 服務器 > Web服務器 > 正文

在CentOS搭建Git服務器的詳細步驟

2024-09-01 13:53:19
字體:
供稿:網友

前言

我們可以GitHub發布一些開源代碼的公共倉庫,但對于私密倉庫就需要收費了。公司內部通常會搭建自己的Git服務器,我也通過在自己的服務器上搭建練習一下。

開始前先說一下服務器信息,這里是阿里云的CentOS 6.5 64位操作系統。

一 確認服務器是否安裝Git

[root@iZ25r8k6ifuZ git]# rpm -qa gitgit-1.7.1-3.el6_4.1.x86_64

這里也已經安裝過了,如果沒有安裝可以用yum install git 安裝。

二 創建git用戶

這里你可以選擇新建一個用戶來測試,也可以直接使用你的root進行以下操作。筆者也是看著資料一步一步來的,這里創建一個新用戶teslachen進行操作。

[root@iZ25r8k6ifuZ ~]# useradd tesla[root@iZ25r8k6ifuZ ~]# passwd tesla

更改用戶 tesla 的密碼 。

新的 密碼:

無效的密碼: 它沒有包含足夠的不同字符

無效的密碼: 過于簡單

重新輸入新的 密碼:

passwd: 所有的身份驗證令牌已經成功更新。

注1:創建用戶權限不夠請加上sudo;

注2:設置用戶密碼太過簡單的話會有提示,但依舊可以設置成功。

三 生成ssh公鑰

許多 Git 服務器都使用 SSH 公鑰進行認證。 為了向 Git 服務器提供 SSH 公鑰,如果某系統用戶尚未擁有密鑰,必須事先為其生成一份。

linux 可以在本機運行ssh-keygen -t rsa生成密鑰,把.pub文件拷到服務器上。

[root@iZ25r8k6ifuZ ~]# su tesla[tesla@iZ25r8k6ifuZ root]$ cd ~[tesla@iZ25r8k6ifuZ ~]$ mkdir .ssh[tesla@iZ25r8k6ifuZ ~]$ ssh-keygen -t rsaGenerating public/private rsa key pair.Enter file in which to save the key (/home/tesla/.ssh/id_rsa):Enter passphrase (empty for no passphrase):Enter same passphrase again:Your identification has been saved in /home/tesla/.ssh/id_rsa.Your public key has been saved in /home/tesla/.ssh/id_rsa.pub.The key fingerprint is:13:bf:75:ba:67:7f:0e:a0:47:7a:fe:25:bc:81:85:c3 tesla@iZ25r8k6ifuZThe key's randomart image is:+--[ RSA 2048]----+|     ||     ||  .  ||   o . . ||  S . E o ||   . O ||   + = = .||   + .o.||   o+oo+|+-----------------+[tesla@iZ25r8k6ifuZ ~]$ cd .ssh/[tesla@iZ25r8k6ifuZ .ssh]$ cat id_rsa.pub >> ~/.ssh/authorized_keysexit

四 添加tesla到sudoers文件

tesla用戶現在對一些文件夾沒有操作權限,修改/etc/sudoers文件來改變他的權限。最高管理員用戶用下面命令打開。

[root@iZ25r8k6ifuZ ~]# visudo

然后我們在vim中找到下面這行

root ALL=(ALL) ALL

按i鍵開始插入,回車一下在下面一行加上

tesla ALL=(ALL) ALL

接著按下esc鍵,輸入 :wq ,回車保存退出

五 創建Git代碼倉庫

[root@iZ25r8k6ifuZ ~]# mkdir /teslaRepo[root@iZ25r8k6ifuZ ~]# cd /teslaRepo/[root@iZ25r8k6ifuZ teslaRepo]# sudo mkdir teslaProject.git[root@iZ25r8k6ifuZ teslaRepo]# chown tesla:tesla /teslaRepo/[root@iZ25r8k6ifuZ teslaRepo]# chown -R tesla:git /teslaRepo/[root@iZ25r8k6ifuZ teslaRepo]# cd teslaProject.git/[root@iZ25r8k6ifuZ teslaProject.git]# sudo git --bare initInitialized empty Git repository in /teslaRepo/teslaProject.git/

這樣一個叫teslaProject得Git倉庫就創建好了

六 本地測試使用

你可以直接在服務器上進行本地測試,也可以直接用你的電腦來測試。下面我是使用自己的MBP來進行的測試。

localhost:~ okay$ cd Desktop/git/localhost:git okay$ mkdir teslaRepolocalhost:git okay$ cd teslaRepo/localhost:teslaRepo okay$ git initInitialized empty Git repository in /Users/okay/Desktop/git/teslaRepo/.git/localhost:teslaRepo okay$ git remote add origin tesla@123.57.159.74:/teslaRepo/teslaProject.git

上面的命令在本地創建了一個文件夾并添加了服務器上的遠程倉庫

localhost:teslaRepo okay$ touch a.txtlocalhost:teslaRepo okay$ git add a.txtlocalhost:teslaRepo okay$ git commit -m "init commit"[master (root-commit) d14cd3b] init commit 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 a.txt

上面的命令在本地創建了一個a.txt并在本地提交了一次

localhost:teslaRepo okay$ git push origin mastertesla@123.57.159.74's password:Counting objects: 3, done.Writing objects: 100% (3/3), 202 bytes | 0 bytes/s, done.Total 3 (delta 0), reused 0 (delta 0)To tesla@123.57.159.74:/teslaRepo/teslaProject.git * [new branch]  master -> master

上面的命令將本地代碼push到遠程服務器上去了,下面我們在本地clone一次看下是否正確

七 本地clone

localhost:git okay$ mkdir tttlocalhost:git okay$ cd tttlocalhost:ttt okay$ git clone tesla@123.57.159.74:/teslaRepo/teslaProject.gitCloning into 'teslaProject'...tesla@123.57.159.74's password:remote: Counting objects: 3, done.remote: Total 3 (delta 0), reused 0 (delta 0)Receiving objects: 100% (3/3), done.Checking connectivity... done.

clone完成,讓我們看一下文件夾目錄

CentOS搭建Git,CentOS搭建Git服務器

之前push到服務器上的a.txt文件已經被clone下來

------------分割線-------------  

1. 查看系統用戶組

-d:指定字段的分隔符,默認的字段分隔符為“TAB”;
-f:顯示指定字段的內容;

cut -d: -f1 /etc/group

2. 查看系統用戶

cut -d: -f1 /etc/passwd

3. clone倉庫

git clone git@your_gitServer_ip:/home/gitrepo/sample.git

4. push已有倉庫

// 以master分支示范git checkout mastergit remote rm origingit remote add origin git@your_gitServer_ip:/home/gitrepo/sample.gitgit push -u origin master

以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持VEVB武林網。


發表評論 共有條評論
用戶名: 密碼:
驗證碼: 匿名發表
主站蜘蛛池模板: 麻城市| 电白县| 沽源县| 博湖县| 淳化县| 湘西| 天峨县| 淄博市| 嘉峪关市| 开封市| 大埔区| 凤台县| 高安市| 循化| 府谷县| 南乐县| 肥城市| 抚州市| 元氏县| 尖扎县| 凌海市| 巴中市| 和林格尔县| 平泉县| 凌海市| 葫芦岛市| 抚顺市| 德兴市| 临朐县| 嘉善县| 垫江县| 新乡市| 明光市| 宣城市| 灵石县| 连州市| 永德县| 永寿县| 峨眉山市| 措勤县| 滕州市|