国产探花免费观看_亚洲丰满少妇自慰呻吟_97日韩有码在线_资源在线日韩欧美_一区二区精品毛片,辰东完美世界有声小说,欢乐颂第一季,yy玄幻小说排行榜完本

首頁 > 服務器 > Web服務器 > 正文

VMware下ubuntu擴展磁盤空間的方法

2024-09-01 13:50:52
字體:
來源:轉載
供稿:網友

近日由于虛擬機下安裝軟件過多,時不時彈出磁盤空間不足的問題。查找了很多資料,都沒有很好的解決辦法。

朋友發來一個鏈接,還是老外有良心。翻譯出來放在這里,根據我的實際需求進行了操作,達到了預期目的。

以防萬一,在操作之前將虛擬機進行了備份。

         由于安裝時沒有自己進行分區,磁盤大小也使用了默認的20G。后來發現果然悲劇。

使用df -h命令查看具體使用情況

@ubuntu:~$ df -h Filesystem   Size Used Avail Use% Mounted on /dev/sda1    19G  17G 1020M 95% / none      4.0K   0 4.0K  0% /sys/fs/cgroup udev      745M 4.0K 745M  1% /dev tmpfs      151M 1.3M 150M  1% /run none      5.0M   0 5.0M  0% /run/lock none      755M 220K 755M  1% /run/shm none      100M  48K 100M  1% /run/user 

使用root權限 fdisk -l查看

在虛擬機的設置——>硬盤——>擴展 選項,選擇需要擴展到的容量,這里我是從20G擴展到40G。

設置完成后發現依然無法使用,而是在擴展分區里。

Disk /dev/sda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders, total 83886080 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ea50f   Device Boot   Start     End   Blocks  Id System /dev/sda1  *    2048  39845887  19921920  83 Linux /dev/sda2    39847934  41940991   1046529  5 Extended /dev/sda5    39847936  41940991   1046528  82 Linux swap / Solaris 

具體思路是將分區先刪除,然后再重新進行分區。注意,這里使用fdisk -l查看的信息建議記錄下來,后面進行重新分區時會使用到。

使用free -m命令查看

bay@ubuntu:~$ free -m        total    used    free   shared  buffers   cached Mem:     1508    1065    443     5     74    419 -/+ buffers/cache:    572    936 Swap:     1021     0    1021 

我們可以看到交換分區的大小,先將交換分區關掉使用命令

root@ubuntu:# swapoff -a root@ubuntu:# free -m        total    used    free   shared  buffers   cached Mem:     1508    1075    433     5     73    419 -/+ buffers/cache:    581    926 Swap:   0     0     0 

這時候可以看到swap的分區大小已經為0了。

接下來的步驟就是刪除掉  /dev/sda1  和 /dev/sda2。使用fdisk /dev/sda刪除分區

root@ubuntu:# fdisk /dev/sda Command (m for help): p Disk /dev/sda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders, total 83886080 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ea50f   Device Boot   Start     End   Blocks  Id System /dev/sda1  *    2048  39845887  19921920  83 Linux /dev/sda2    39847934  41940991   1046529  5 Extended /dev/sda5    39847936  41940991   1046528  82 Linux swap / Solaris Command (m for help): d Partition number (1-5): 1 Command (m for help): d Partition number (1-5): 2 Command (m for help): p Disk /dev/sda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders, total 83886080 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ea50f   Device Boot   Start     End   Blocks  Id System 

刪除舊的分區之后,就開始進行創建新分區了,注意這時候讓之前保存的信息就派上用場了。

Command (m for help): n Partition type:   p  primary (0 primary, 0 extended, 4 free)   e  extended Select (default p): p Partition number (1-4, default 1): 1 First sector (2048-83886079, default 2048):  Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-83886079, default 83886079): 82869552 

注意這是時候可能會有人疑惑,這個大小該如何設置。

這個大小是總的大小減去Swap的大小:83886080 - 1046528 = 82839552。這里的1046528 就是Swap的大小。

接著將分區的事情做完:

Command (m for help): n Partition type:   p  primary (1 primary, 0 extended, 3 free)   e  extended Select (default p): p Partition number (1-4, default 2): 2 First sector (82839553-83886079, default 82839553):  Using default value 82839553 Last sector, +sectors or +size{K,M,G} (82839553-83886079, default 83886079):  Using default value 83886079 Command (m for help): p Disk /dev/sda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders, total 83886080 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ea50f   Device Boot   Start     End   Blocks  Id System /dev/sda1      2048  82839552  41418752+ 83 Linux /dev/sda2    82839553  83886079   523263+ 83 Linux 

這個時候分區大小是正確的了,但是ID還是同一個值。在這里我們將交換分區的ID修改為82.

Command (m for help): t Partition number (1-4): 2 Hex code (type L to list codes): 82 Changed system type of partition 2 to 82 (Linux swap / Solaris) 

使用w進行保存

Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks. 

將虛擬機進行重啟。

交換分區使用UUID進行掛載。在創建新的分區之后,UUID將會不匹配,在reboot之后將沒有交換分區可以使用。這里有兩種方式進行處理

1)在 /etc/fstab 中使用新的UUID

2)在新的分區上使用舊的UUID。這里使用第二種方法。

查看UUID:

root@ubuntu:/home/bay# awk '/swap/ { print $1 }' /etc/fstab # UUID=990ae69c-2bbe-425f-bb8f-91200f70c9b9 [html] view plain copyroot@ubuntu:# swapoff -a root@ubuntu:# free -m        total    used    free   shared  buffers   cached Mem:     1508    1171    337     6    191    424 -/+ buffers/cache:    555    953 Swap:      0     0     0 root@ubuntu:# dd if=/dev/zero of=/dev/sda2 dd: writing to ‘/dev/sda2': No space left on device 1046528+0 records in 1046527+0 records out 535821824 bytes (536 MB) copied, 1.89975 s, 282 MB/s root@ubuntu:# mkswap -U 990ae69c-2bbe-425f-bb8f-91200f70c9b9 /dev/sda2 Setting up swapspace version 1, size = 523256 KiB no label, UUID=990ae69c-2bbe-425f-bb8f-91200f70c9b9 root@ubuntu:# swapon -a root@ubuntu:# free -m        total    used    free   shared  buffers   cached Mem:     1508    717    790     6     6    164 -/+ buffers/cache:    546    961 Swap:     510     0    510 root@ubuntu:# df -h Filesystem   Size Used Avail Use% Mounted on /dev/sda1    19G  17G 1023M 95% / none      4.0K   0 4.0K  0% /sys/fs/cgroup udev      745M  12K 745M  1% /dev tmpfs      151M 1.3M 150M  1% /run none      5.0M   0 5.0M  0% /run/lock none      755M 152K 755M  1% /run/shm none      100M  48K 100M  1% /run/user root@ubuntu:# resize2fs /dev/sda1 resize2fs 1.42.9 (4-Feb-2014) Filesystem at /dev/sda1 is mounted on /; on-line resizing required old_desc_blocks = 2, new_desc_blocks = 3 The filesystem on /dev/sda1 is now 10354688 blocks long. root@ubuntu:# df -h Filesystem   Size Used Avail Use% Mounted on /dev/sda1    39G  17G  21G 45% / none      4.0K   0 4.0K  0% /sys/fs/cgroup udev      745M  12K 745M  1% /dev tmpfs      151M 1.3M 150M  1% /run none      5.0M   0 5.0M  0% /run/lock none      755M 152K 755M  1% /run/shm none      100M  48K 100M  1% /run/user 

dd命令僅僅是保證在分區開始的地方沒有數據。

以上所述是小編給大家介紹的VMware下ubuntu擴展磁盤空間的方法,希望對大家有所幫助,如果大家有任何疑問請給我留言,小編會及時回復大家的。在此也非常感謝大家對VEVB武林網網站的支持!

 

發表評論 共有條評論
用戶名: 密碼:
驗證碼: 匿名發表
主站蜘蛛池模板: 浏阳市| 高阳县| 西贡区| 伊金霍洛旗| 郑州市| 沂源县| 屯留县| 新乡市| 麻江县| 瓦房店市| 正宁县| 铜川市| 娱乐| 长沙市| 金湖县| 武汉市| 沅江市| 满城县| 莱阳市| 马龙县| 永新县| 虞城县| 晋中市| 裕民县| 泉州市| 印江| 南康市| 武定县| 兴义市| 綦江县| 蓬溪县| 莎车县| 五大连池市| 右玉县| 陈巴尔虎旗| 柘城县| 郁南县| 慈利县| 辉县市| 宣城市| 麻江县|