Oracle診斷案例：Job任務停止執行

2024-08-29 13:46:10

字體：大中小

來源：轉載

供稿：網友

　　摘要:

　　本文通過一次Oracle Job任務異常案例診斷，分析其原因及解決過程，從內部揭示Oracle Job任務調度及內部計時機制。

　　問題及環境

　　接到研發人員報告，數據庫定時任務未正常執行，導致某些操作失敗。

　　開始介入處理該事故.

　　系統環境:

SunOS DB 5.8 Generic_108528-21 sun4u sparc SUNW,Ultra-4 
Oracle9i EnterPRise Edition Release 9.2.0.3.0 - ProdUCtion

　　解決過程

　　首先介入檢查數據庫任務

$ sqlplus "/ as sysdba" 
SQL*Plus: Release 9.2.0.3.0 - Production on Wed Nov 17 20:23:53 2004 
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved. 
Connected to: 
Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production 
With the Partitioning, OLAP and Oracle Data Mining options 
JServer Release 9.2.0.3.0 - Production 
SQL> select job,last_date,last_sec,next_date,next_sec,broken,failures from 
dba_jobs; 
JOB LAST_DATE LAST_SEC NEXT_DATE NEXT_SEC B FAILURES 
INTERVAL 
---------- --------- ---------------- --------- ---------------- - ---------- 
---------------------------- 
31 16-NOV-04 01:00:02 17-NOV-04 01:00:00 N 0 
trunc(sysdate+1)+1/24 
27 16-NOV-04 00:00:04 17-NOV-04 00:00:00 N 0 
TRUNC(SYSDATE) + 1 
35 16-NOV-04 01:00:02 17-NOV-04 01:00:00 N 0 
trunc(sysdate+1)+1/24 
29 16-NOV-04 00:00:04 17-NOV-04 00:00:00 N 0 
TRUNC(SYSDATE) + 1 
30 01-NOV-04 06:00:01 01-DEC-04 06:00:00 N 0 
trunc(add_months(sysdate,1),’MM’)+6/24 
65 16-NOV-04 04:00:03 17-NOV-04 04:00:00 N 0 
trunc(sysdate+1)+4/24 
46 16-NOV-04 02:14:27 17-NOV-04 02:14:27 N 0 
sysdate+1 
66 16-NOV-04 03:00:02 17-NOV-04 18:14:49 N 0 
trunc(sysdate+1)+3/24 
8 rows selected.

　　發現JOB任務是都沒有正常執行，最早一個應該在17-NOV-04 01:00:00執行。但是沒有執行。

　　建立測試JOB

create or replace PROCEDURE pining 

IS 
BEGIN 
NULL; 
END; 
/ 
variable jobno number; 
variable instno number; 
begin 
select instance_number into :instno from v$instance; 
dbms_job.submit(:jobno, ’pining;’, trunc(sysdate+1/288,’MI’), 
’trunc(SYSDATE+1/288,’’MI’’)’, TRUE, :instno); 
end; 
/

　　發現同樣的，不執行。

　　但是通過dbms_job.run(<job>)執行沒有任何問題。

　　進行恢復嘗試

　　懷疑是CJQ0進程失效，首先設置JOB_QUEUE_PROCESSES為0，Oracle會殺掉CJQ0及相應job進程

SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 0;
　　等2~3分鐘，重新設置

SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 5;
　　此時PMON會重起CJQ0進程

Thu Nov 18 11:59:50 2004 

ALTER SYSTEM SET job_queue_processes=0 SCOPE=MEMORY; 
Thu Nov 18 12:01:30 2004 
ALTER SYSTEM SET job_queue_processes=10 SCOPE=MEMORY; 
Thu Nov 18 12:01:30 2004 
Restarting dead background process CJQ0 
CJQ0 started with pid=8 
但是Job仍然不執行，而且在再次修改的時候，CJQ0直接死掉了。
                          
Thu Nov 18 13:52:05 2004 
ALTER SYSTEM SET job_queue_processes=0 SCOPE=MEMORY; 
Thu Nov 18 14:09:30 2004 
ALTER SYSTEM SET job_queue_processes=10 SCOPE=MEMORY; 
Thu Nov 18 14:10:27 2004 
ALTER SYSTEM SET job_queue_processes=0 SCOPE=MEMORY; 
Thu Nov 18 14:10:42 2004 
ALTER SYSTEM SET job_queue_processes=10 SCOPE=MEMORY; 
Thu Nov 18 14:31:07 2004 
ALTER SYSTEM SET job_queue_processes=0 SCOPE=MEMORY; 
Thu Nov 18 14:40:14 2004 
ALTER SYSTEM SET job_queue_processes=10 SCOPE=MEMORY; 
Thu Nov 18 14:40:28 2004 
ALTER SYSTEM SET job_queue_processes=0 SCOPE=MEMORY; 
Thu Nov 18 14:40:33 2004 
ALTER SYSTEM SET job_queue_processes=1 SCOPE=MEMORY; 
Thu Nov 18 14:40:40 2004 
ALTER SYSTEM SET job_queue_processes=10 SCOPE=MEMORY; 
Thu Nov 18 15:00:42 2004 
ALTER SYSTEM SET job_queue_processes=0 SCOPE=MEMORY; 

Thu Nov 18 15:01:36 2004 
ALTER SYSTEM SET job_queue_processes=15 SCOPE=MEMORY;

　　嘗試重起數據庫，這個必須在晚上進行：

PMON started with pid=2 
DBW0 started with pid=3 
LGWR started with pid=4 
CKPT started with pid=5 
SMON started with pid=6 
RECO started with pid=7 
CJQ0 started with pid=8 
QMN0 started with pid=9 
....

　　 CJQ0正常啟動，但是Job仍然不執行。

　　沒辦法了...

　　繼續研究...居然發現Oralce有這樣一個bug

1. Clear description of the problem encountered: 
slgcsf() / slgcs() on Solaris will stop incrementing after 
497 days 2 hrs 28 mins (approx) machine uptime. 

2. Pertinent configuration information 
No special configuration other than long machine uptime. . 
3. Indication of the frequency and predictability of the problem 
100% but only after 497 days. 
4. Sequence of events leading to the problem 
If the gethrtime() OS call returns a value > 42949672950000000 
nanoseconds then slgcs() stays at 0xffffffff. This can 
cause some problems in parts of the code which rely on 
slgcs() to keep moving. 
eg: In kkjssrh() does "now = slgcs(&se)" and compares that 
to a previous timestamp. After 497 days uptime slgcs() 
keeps returning 0xffffffff so "now - kkjlsrt" will 
always return 0. . 
5. Technical impact on the customer. Include persistent after effects. 
In this case DBMS JOBS stopped running after 497 days uptime. 
Other symptoms could occur in various places in the code.

　　好么，原來是計時器溢出了，一檢查我的主機:

bash-2.03$ uptime 
10:00pm up 500 day(s), 14:57, 1 user, load average: 1.31, 1.09, 1.08 
bash-2.03$ date 
Fri Nov 19 22:00:14 CST 2004

　　剛好到事發時是497天多一點.ft.

　　安排重起主機系統..

　　這個問題夠郁悶的，NND，誰曾想Oracle這都成...

　　 Oracle最后聲稱:

fix made it into 9.2.0.6 patchset

　　在Solaris上的9206尚未發布...暈.

　　好了，就當是個經歷吧，假如有問題非常不可思議的話，那么大膽懷疑Oracle吧，是Bug，可能就是Bug。

　　重起以后問題解決，狀態如下:

$ sqlplus "/ as sysdba" 
SQL*Plus: Release 9.2.0.3.0 - Production on Fri Nov 26 09:21:21 2004 
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved. 
Connected to: 
Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production 
With the Partitioning, OLAP and Oracle Data Mining options 
JServer Release 9.2.0.3.0 - Production 
SQL>
                          select job,last_date,last_sec,next_date,next_sec from user_jobs; 

JOB LAST_DATE LAST_SEC NEXT_DATE NEXT_SEC 
---------- --------- ---------------- --------- ---------------- 
70 26-NOV-04 09:21:04 26-NOV-04 09:26:00 
SQL> / 
JOB LAST_DATE LAST_SEC NEXT_DATE NEXT_SEC 
---------- --------- ---------------- --------- ---------------- 
70 26-NOV-04 09:26:01 26-NOV-04 09:31:00 
SQL> 
SQL> select * from v$timer; 
HSECS 
---------- 
3388153 
SQL> select * from v$timer; 
HSECS 
---------- 
3388319 
SQL> 
FAQ