ORACLE在HP-UX下的系列問題處理(39)
2024-08-29 13:40:02
供稿：網友
c110 錯誤: reading model information status=-3問題描述
我在我的C110上替換了 CPU 主板，
但是現在系統在識別該模型時碰到了困難。 有時，它的ID為9000/777/c110，
有時為 9000/800。 尤其是ss_config 沒有在系統中運行， 假如替換IO卡，它將會提示我在啟動時輸入lan station 地址，當出現這種識別問題時，我會得到下面的信息：
ERROR: reading model information status=-3
mapper shows can't read model string pdc_model status=-3.
應該怎樣解決這種 J 或 C 系列 系統的硬件問題?
配置信息
操作系統 - HP-UX
版本 -
硬件系統 - HP 9000
系列 -
解決方法
在這種情況下，在啟動控制臺例程中使用默認的PDC，這樣這個問題就會得到解決.
可選要害字
status = -3
c160
c180
c200
c240
.........following with all English text ....c110 ERROR: reading model information status=-3PRoblem Description
I replaced the CPU board on my C110, but now the system is having a hard time identifying the model. Sometimes it id's it as a 9000/777/c110, sometimes as a 9000/800. Typically ss_config is not run on this system, if the io card is replaced it will prompt me to enter the lan station addresses at power up. When the
identification problem occurs I get message:
ERROR: reading model information status=-3, mapper shows can't read model string pdc_model status=-3.
How is this J or C series system hardware problem fixed?
Configuration Info
Operating System - HP-UX
Version -
Hardware System - HP 9000
Series -
Solution
In this case defaulted PDC from the boot console handler, and this cleared the problem.
Alternative KeyWords
status = -3
c160
c180
c200
c240
