2.9   SNMP網管的配置

【Router】

當前路由器提示視圖

依次輸入的配置命令，重要的命令紅色突出顯示

簡單說明

!

適用版本vrp1.74及1.44

[Router]

!

[Router]

interface Ethernet0

[Router-Ethernet0]

ip address 10.0.0.1 255.255.255.0

!

[Router]

interface Serial0

[Router-Serial0]

link-PRotocol ppp

!

[Router]

interface Bri0

[Router-Bri0]

link-protocol ppp

[Router-Bri0]

dialer in-band

!

quit

[Router]

snmp-agent

使能snmp服務

[Router]

snmp-agent local-engineid 800007DB0300E0FC0F6256

全網唯一設備引擎ID

[Router]

snmp-agent community read isPublic

設置讀團體名:isPublic

[Router]

snmp-agent community write isPrivate

設置寫團體名:isPrivate

[Router]

snmp-agent sys-info version all

選擇網管snmpv1/v2/v3

[Router]

snmp-agent sys-info contact 010-12345678

聯系電話:010-12345678

[Router]

snmp-agent target-host trap address 10.0.0.10 port 69 parameters v1 securityname aaa

設置trap接收主機10.0.0.10

[Router]

snmp-agent sys-info location Huawei Tech. Beijing, China

路由器位置

[Router]

snmp-agent trap enable standard authentication coldstart linkdown linkup warmstart

Trap的內容standard authentication coldstart linkdown linkup warmstart

[Router]

snmp-agent trap enable system

Trap的內容system

!

『注重』

1.網管的community name應該與路由器上配置一致

2.缺省配置下community read name為public, community write name為private