sybex書的135頁的一個實驗： 我照著他的配置去配，但是最后發現D不能到達A，當我在Routerc上的router ospf 24中加入這句：redistribute rip subnet后，D 就可以到達A 了，我看了一下前后的d的路由表是一樣的，請問為什么呢？RouterA interface Ethernet0 ip address 10.1.1.1 255.255.255.0 ! interface Ethernet1 ip address 10.1.2.1 255.255.255.0 ! router ospf 24 network 10.0.0.0 0.255.255.255 area 0
RouterB interface Ethernet0 ip address 10.1.2.2 255.255.255.0 ! interface Ethernet1 ip address 1.1.1.1 255.255.255.0 ! router ospf 24 network 10.0.0.0 0.255.255.255 area 0 network 1.0.0.0 0.255.255.255 area 1 area 0 range 10.0.0.0 255.255.0.0 area 1 nssa
RouterC interface Ethernet0 ip address 1.1.1.2 255.255.255.0 ! interface Ethernet1 ip address 172.16.1.1 255.255.255.0 ! router ospf 24 redistribute rip network 1.0.0.0 0.255.255.255 area 1 default-metric 128 area 1 nssa ! router rip redistribute ospf 24 network 172.16.0.0 default-metric 3
RouterD interface Ethernet0 ip address 172.16.1.2 255.255.255.0 ! interface Ethernet1 ip address 172.16.2.1 255.255.255.0 ! router rip network 172.16.0.0
RouterD的路由表： Gateway of last resort is not set
R 1.0.0.0/8 [120/3] via 172.16.1.1, 00:00:02, Ethernet0 R 10.0.0.0/8 [120/3] via 172.16.1.1, 00:00:02, Ethernet0 172.16.0.0/24 is subnetted, 2 subnets C 172.16.1.0 is directly connected, Ethernet0 C 172.16.2.0 is directly connected, Loopback1
