骨干ISP配置實例

2019-11-04 20:26:50

字體：大中小

供稿：網(wǎng)友

　　-------------所需設備和參數(shù)表------------------------
　　ISP1—Device Characteristics and Complete
　　
　　Configuration Files
　　
　　
　　Note The multicast solutions in this document were tested with valid ip addresses. In the
　　
　　example configurations PRovided in the following sections, the first octet of these reserved
　　
　　IP addresses has been replaced with the letter “J” or the letter “K” for privacy reasons. The
　　
　　letter “J” always represents one unique number, and the letter “K” always represents one
　　
　　unique number that is different from “J.”
　　
　　The example configurations are intended for illustrative purposes only. The letters “J” and
　　
　　“K” must be replaced with valid numbers when these IP addresses are configured in an
　　
　　actual network.
　　
　　ISP1 and ISP1-POP
　　
　　This section includes the device characteristics and configuration files for the following host names in
　　
　　ISP1:
　　
　　• ISP1BB1
　　
　　• ISP1BB2
　　
　　• ISP1BB3
　　
　　• ISP1BB4
　　
　　• ISP1BB5
　　
　　• ISP1BB6
　　
　　• ISP1BB7
　　
　　• ISP1DA1
　　
　　• ISP1DA2
　　
　　• ISP1DA3
　　
　　• ISP1AC1
　　
　　• ISP1AC2

上一篇：骨干ISP配置實例之ISP1BB2的配置

下一篇：骨干ISP配置實例之 ISP1BB6的配置